Wax Based Release Agent   

Characteristcs:   

• 1.The flash point is 63'C, which is non-dangerous goods and can save a lot of storage and transportation costs.

• 2.Low VOC release to meet environmental requirements and reduce health hazards toproduction personnel.

• 3.Does not contain any prohibited toxic substances.

• 4.This product has excellent adhesion to most molds, and complex molds can also cover themold surface perfectly and evenly.

• 5.High lubrication, the product after stripping feels good, the surface is fine, and the opening isuniform

• 6.Slow scaling, while improving production efficiency can also reduce production costs.

Storage Conditions: 

10-38 ℃
 

Packing: 

30L or 200L in per drum.
 

Usage Instruction:  

1.Before spraying or brushing the release agent, the surface of the mold must be thoroughly cleaned. 

The dirt and oil stains on the surface of the mold can be cleaned with organic solvents such as mold cleaning agent and acetone.

2. Used by spraying or brushing and spraied or brushed with way of horizontal, vertical, cross each twice, and only when the release agent volatilizes then make the main material production.

Application:        

Car Seats,  Car Headrests, Car Carpets, Car Armrests, Seat Cushions etc.