High Concentrated Release Agent 8600/20 8600/20 is wax release agent, available for all fields of polyurethane flexible foam. It’s very small vinegar particle size and meets all the stringent requirements on slow rebound products, especially on car seats This release agent will be replaced as a more suitable products that specifically designed for high-resiliency foam applications and popular among polyurethane customers.   Low VOC Very good anti-sedimentation More surstable  Fine and smooth surface More efficiently  More environmentally friendly More healthy for workers during production &nbs...

WHAT RELEASE AGENT IS BETTER FOR BUILDING INDUSTRY. TR-209 is a Fluoro-silicon release agent developed by us since 2009 and continuously upgraded and iterated in advance with the times.   The special modified silicon material in the product is equipped with Teflon. This release agent only makes the release more convenient and simple, but also greatly slows down the speed of dirty mold, prolongs the cycle of cleaning mold, and makes the maintenance of mold become a simple thing.   Because of its perfect demudding experience and excellent surface effect, it has been widely used in lots fields of polyurethane products on semi-hard foam, hard foam, composite materials...

ELASTOMER RELEASE AGENT ES13771.   ES13771 Elastomer release agent is a kind of release agent special designed with fluorine polymer Teflon. lt is a new generation of fluoro-silicon release agent developed specifically for the growing polyurethane elastomer market. ES13771 is good on forming a layer of dense, smooth, insulating, acid and alkali resistant, high-temperature corrosion resistant Teflon film on the surface of the mold, which can quickly, efficiently and continuously separate the mold from the product.   CHARACTERISTICS.   This product can be used perfectly in polyester system and polye...

PU WAITTING SEATS RIGID FOAM SEMI-PERMANENT RELEASE AGENT  E653 is a siloxane modified water-based release agent developed and produced by Yifan for many years in nanoscale emulsion with ultra-fine particle size. It makes the customers experience the efficiently and ecomomically and happily for without cleaning mold as spraying one time can keep for more than 500 molds   It's significantly characteristics is that it can keep a good glossy surface with efficient release ability and qualitatively deferred the speed on getting the mold dirty.     CHARACTERISTICS. Excellent mold maintenance ability, easily solve the problem of mold clean...

FURNITURE CUSHION MEMORRY PU FOAM RELEASE AGENT. This product is specially designed for polyurethane slow rebound and similar low mold temperature products.   It adopts a special low temperature production process, only suitable for mold temperature below 60 degrees working environment,   At the mold temperature below 60 degrees, it has better film formation, leveling and ductility than other products, so it can obtain better continuous release ability and less spray amount in actua spraying CHARACTERISTICS. Super continuous demudding ability, in a silent way, quietly lurking in the mold cavity, almost will not have any contamination...

FURNITURE CUSHION MEMORRY PU FOAM RELEASE AGENT. This product is specially designed for polyurethane slow rebound and similar low mold temperature products.   It adopts a special low temperature production process, only suitable for mold temperature below 60 degrees working environment,   At the mold temperature below 60 degrees, it has better film formation, leveling and ductility than other products, so it can obtain better continuous release ability and less spray amount in actua spraying CHARACTERISTICS. Super continuous demudding ability, in a silent way, quietly lurking in the mold cavity, almost will not have any contamination...

  WATER BASED RELEASE AGENT FOR PU WHEELS.  TR-818W is the one developed along us with the most longest time, the strongest stability, and the most cost-effective water-based micro emulsion release agent.   It's ultra-high solid content bring this product a strong cost performance, and due to this reason, it is hot welcomed and widely used by many market in EVA, cement, rubber and other products release CHARACTERISTICS.  The Most cost-effective The Strongest stability  Hot welcomed and widely used Longest history APPLICATIONS. PU Wheels of Buggies,Child’s B...

SELF-SKIN RELEASE AGENT FOR PU TOYS TR-280C. TR-280C is a polymerized silica wax release agent. This product has multiple product systems, which can match the corresponding brightness value according to different needs.   And the whole system products have a stable chemical structure, the surface of the products produced dry and non-greasy, high dilution times three major characteristics. lt has been the fist product of Guangzhou Yifan Chemical industry for more than ten years. CHARACTERISTICS. According to the custom requirements, adjust the surface brightness of the product Good demoulding performance, even in some complex molds can be ...

WHAT MOLD RELEASE AGENT FOR SHOES PRODUCTION ?   Waster-Based Release Agent for PU Shoe Soles-Upper Sole. TR-818W is the one developed along us with the most longest time, the strongest stability, and the most cost-effective water-based micro emulsion release agent.   It's ultra-high solid content bring this product a strong cost performance, and due to this reason, it is hot welcomed and widely used by many market in EVA, cement, rubber and other products release. CHARACTERISTIC. The Most cost-effective   The Strongest stability   Hot welcomed and widely used    Longest history...